Właściwość filtra CSS
Przykład
Zmień wszystkie obrazy na czarno-białe (100% szarości):
img {
filter: grayscale(100%);
}
Wskazówka: więcej przykładów „Wypróbuj sam” poniżej.
Definicja i użycie
Właściwość filter
definiuje efekty wizualne (takie jak rozmycie i nasycenie) elementu (często <img>).
Domyślna wartość: | Żaden |
---|---|
Dziedziczny: | nie |
Animowalny: | tak. Przeczytaj o animacji |
Wersja: | CSS3 |
Składnia JavaScript: | obiekt .style.filter="skala szarości (100%)" |
Obsługa przeglądarki
Liczby w tabeli określają pierwszą wersję przeglądarki, która w pełni obsługuje tę właściwość.
Liczby, po których następuje -webkit- określają pierwszą wersję, która działała z przedrostkiem.
Property | |||||
---|---|---|---|---|---|
filter | 53.0 18.0 -webkit- |
13.0 | 35.0 | 9.1 6.0 -webkit- |
40.0 15.0 -webkit- |
Składnia CSS
filter: none | blur() | brightness() | contrast() | drop-shadow() | grayscale() | hue-rotate() | invert() | opacity() | saturate() | sepia() | url();
Wskazówka: aby użyć wielu filtrów, oddziel każdy filtr spacją (patrz „Więcej przykładów” poniżej).
Funkcje filtra
Uwaga: Filtry używające wartości procentowych (np. 75%) również akceptują wartość jako dziesiętną (np. 0,75).
Filter | Description | Play it |
---|---|---|
none | Default value. Specifies no effects | |
blur(px) | Applies a blur effect to the image. A larger value will create more blur. If no value is specified, 0 is used. |
|
brightness(%) | Adjusts the brightness of the image. 0% will make the image completely black. 100% (1) is default and represents the original image. Values over 100% will provide brighter results. |
|
contrast(%) | Adjusts the contrast of the image. 0% will make the image completely black. 100% (1) is default, and represents the original image. Values over 100% will provide results with more contrast. |
|
drop-shadow(h-shadow v-shadow blur spread color) | Applies a drop shadow effect to the image. Possible values: h-shadow - Required. Specifies a pixel value for the horizontal shadow. Negative values place the shadow to the left of the image. v-shadow - Required. Specifies a pixel value for the vertical shadow. Negative values place the shadow above the image. blur - Optional. This is the third value, and must be in pixels. Adds a blur effect to the shadow. A larger value will create more blur (the shadow becomes bigger and lighter). Negative values are not allowed. If no value is specified, 0 is used (the shadow's edge is sharp). spread - Optional. This is the fourth value, and must be in pixels. Positive values will cause the shadow to expand and grow bigger, and negative values will cause the shadow to shrink. If not specified, it will be 0 (the shadow will be the same size as the element). Note: Chrome, Safari and Opera, and maybe other browsers, do not support this 4th length; it will not render if added. color - Optional. Adds a color to the shadow. If not specified, the color depends on the browser (often black). An example of creating a red shadow, which is 8px big both horizontally and vertically, with a blur effect of 10px: filter: drop-shadow(8px 8px 10px red); Tip: This filter is similar to the box-shadow property. |
|
grayscale(%) | Converts the image to grayscale. 0% (0) is default and represents the original image. 100% will make the image completely gray (used for black and white images). Note: Negative values are not allowed. |
|
hue-rotate(deg) | Applies a hue rotation on the image. The value defines the number of degrees around the color circle the image samples will be adjusted. 0deg is default, and represents the original image. Note: Maximum value is 360deg. |
|
invert(%) | Inverts the samples in the image. 0% (0) is default and represents the original image. 100% will make the image completely inverted. Note: Negative values are not allowed. |
|
opacity(%) | Sets the opacity level for the image. The opacity-level describes the transparency-level, where: 0% is completely transparent. 100% (1) is default and represents the original image (no transparency). Note: Negative values are not allowed. Tip: This filter is similar to the opacity property. |
|
saturate(%) | Saturates the image. 0% (0) will make the image completely un-saturated. 100% is default and represents the original image. Values over 100% provides super-saturated results. Note: Negative values are not allowed. |
|
sepia(%) | Converts the image to sepia. 0% (0) is default and represents the original image. 100% will make the image completely sepia. Note: Negative values are not allowed. |
|
url() | The url() function takes the location of an XML file that specifies an SVG filter, and may include an anchor to a specific filter element. Example: filter: url(svg-url#element-id) |
|
initial | Sets this property to its default value. Read about initial | |
inherit | Inherits this property from its parent element. Read about inherit |
Więcej przykładów
Przykład rozmycia
Zastosuj efekt rozmycia do obrazu:
img {
filter: blur(5px);
}
Przykład rozmycia 2
Zastosuj rozmazany obraz tła:
img.background {
filter: blur(35px);
}
Przykład jasności
Dostosuj jasność obrazu:
img {
filter: brightness(200%);
}
Przykład kontrastu
Dostosuj kontrast obrazu:
img {
filter: contrast(200%);
}
Przykład upuszczania cieni
Zastosuj efekt cienia do obrazu:
img {
filter: drop-shadow(8px 8px 10px
gray);
}
Przykład w skali szarości
Konwertuj obraz na skalę szarości:
img {
filter: grayscale(50%);
}
Przykład rotacji barwy
Zastosuj obrót odcienia na obrazie:
img {
filter: hue-rotate(90deg);
}
Odwróć przykład
Odwróć próbki na obrazku:
img {
filter: invert(100%);
}
Przykład krycia
Ustaw poziom krycia obrazu:
img {
filter: opacity(30%);
}
Przykład nasycenia
Nasycić obraz:
img {
filter: saturate(800%);
}
Przykład sepii
Konwertuj obraz na sepię:
img {
filter: sepia(100%);
}
Korzystanie z wielu filtrów
Aby użyć wielu filtrów, oddziel każdy filtr spacją. Zwróć uwagę, że kolejność jest ważna (np. użycie grayscale() po sepia() spowoduje, że obraz będzie całkowicie szary):
img {
filter: contrast(200%) brightness(150%);
}
Wszystkie filtry
Demonstracja wszystkich funkcji filtrów:
.blur {
filter: blur(4px);
}
.brightness {
filter: brightness(0.30);
}
.contrast {
filter: contrast(180%);
}
.grayscale {
filter: grayscale(100%);
}
.huerotate {
filter: hue-rotate(180deg);
}
.invert {
filter: invert(100%);
}
.opacity {
filter: opacity(50%);
}
.saturate {
filter: saturate(7);
}
.sepia {
filter: sepia(100%);
}
.shadow {
filter: drop-shadow(8px 8px 10px green);
}
Powiązane strony
Samouczek CSS: obrazy CSS
Dokumentacja HTML DOM: właściwość filtra